Sign Out
Instructions for use of Fraizeron 300 mg UNOREADY Solution for Injection in Pre-Filled Pen: Read ALL the way through these instructions before injecting.
These instructions are to help you to inject correctly using the Fraizeron UNOREADY pen.
It is important not to try to inject yourself until you have been trained by your doctor, nurse or pharmacist.
Your Fraizeron UNOREADY pen 300 mg: Keep the Fraizeron UNOREADY pen in the sealed outer carton until you are ready to use it to protect it from light.
Store your Fraizeron UNOREADY pen in a refrigerator between 2°C and 8°C.
Do not freeze the Fraizeron UNOREADY pen.
Do not shake the Fraizeron UNOREADY pen.
Do not use the Fraizeron UNOREADY pen if it has been dropped with the cap removed.
The needle is covered by the needle guard and the needle will not be seen. Do not touch or push the needle guard because you could get a needle stick.
What you need for your injection: Included in the carton: A new, unused Fraizeron UNOREADY pen.
Not included in the carton: Alcohol swab, Cotton ball or gauze, Sharps disposal container.
See "How should I dispose of used Fraizeron UNOREADY pens?" at the end of this Instructions for Use.
Before your injection: For a more comfortable injection, take the Fraizeron UNOREADY pen out of the refrigerator 30 to 45 minutes before injecting to allow it to reach room temperature.
1. Important safety checks before you inject: For the "viewing window": The liquid should be clear. Its colour may vary from colourless to slightly yellow.
Do not use if the liquid contains easily visible particles, is cloudy or is distinctly brown. You may see a small air bubbles, which is normal.
For the "Expiration date": Do not use the pen if the expiration date has passed.
Check that your pen contains the correct medicine and dosage. Contact your pharmacist if the pen fails any of these checks.
2a. Choose your injection site: The recommended site is the front of the thighs. You may also use the lower abdomen, but not the area 2 inches (5 cm) around the navel (belly button).
Choose a different site each time you give yourself an injection.
Do not inject into areas where the skin is tender, bruised, red, scaly or hard. Avoid areas with scars or stretch marks.
2b. Caregivers and healthcare professionals only: If a caregiver or healthcare professional is giving you your injection, they may also inject into your outer upper arm.
3. Cleaning your injection site: Wash your hands with soap and hot water.
Using a circular motion, clean the injection site with the alcohol swab. Leave it to dry before injecting.
Do not touch the cleaned area again before injecting.
Your injection: 4. Removing the cap: Only remove the cap when you are ready to use the pen.
Pull the cap straight off.
Once removed, throw away the cap. Do not try to re-attach the cap as you may bend the needle.
Use the pen within 5 minutes of removing the cap.
5. Holding your Fraizeron UNOREADY pen: Hold the pen at 90 degrees to the cleaned injection site.
YOU MUST READ THIS BEFORE INJECTING: During the injection you will hear 2 clicks.
The 1st click indicates that the injection has started. Several seconds later a 2nd click will indicate that the injection is almost finished.
You must keep holding the pen firmly against your skin until you see a green indicator with a grey tip fill the window and stop moving.
6. Starting your injection: Press the pen firmly against the skin to start the injection.
The 1st click indicates the injection has started.
Keep holding the pen firmly against your skin.
The green indicator with the grey tip shows the progress of the injection.
7. Completing your injection: Listen for the 2nd click. This indicates the injection is almost complete.
Check the green indicator with the grey tip has filled the window and has stopped moving.
The pen can now be removed.
After your injection: 8. Check the green indicator fills the window: This means the medicine has been delivered. Contact your doctor or pharmacist if the green indicator is not visible.
There may be a small amount of blood at the injection site. You can press a cotton ball or gauze over the injection site and hold it for 10 seconds. Do not rub the injection site. You may cover the injection site with a small adhesive bandage, if needed.
9. Disposing of your UNOREADY pen: Dispose of the used pen in a sharps disposal container (i.e. a puncture-resistant closable container, or similar).
Never try to reuse your pen.
Instructions for use of Fraizeron SensoReady solution for injection in pre-filled pen: Read ALL the way through these instructions before injecting.
These instructions are to help you to inject correctly using the Fraizeron SensoReady pen.
It is important not to try to inject yourself or a person in your care until you have been trained by your doctor, nurse or pharmacist.
Your Fraizeron SensoReady pen: Store your boxed Fraizeron SensoReady pen in a refrigerator between 2°C and 8°C.
Do not freeze the Fraizeron SensoReady pen.
Do not shake the Fraizeron SensoReady pen.
Do not use the Fraizeron SensoReady pen if it has been dropped with the cap removed.
For a more comfortable injection, take the Fraizeron SensoReady pen out of the refrigerator 15 to 30 minutes before injecting to allow it to reach room temperature.
What you need for your injection: Included in the carton: A new and unused Fraizeron SensoReady pen. 1 pen is needed for a 150 mg dose and 2 pens are needed for a 300 mg dose.
Not included in the carton: Alcohol swab, Cotton ball or gauze, Sharps disposal container.
Before your injection: 1. Important safety checks before you inject: The liquid should be clear. Its color may vary from colorless to slightly yellow.
Do not use if the liquid contains easily visible particles, is cloudy or is distinctly brown. You may see a small air bubble, which is normal.
Do not use your Fraizeron SensoReady pen if the expiration date has passed.
Do not use if the safety seal has been broken.
Contact your pharmacist if the Fraizeron SensoReady pen fails any of these checks.
2a. Choose your injection site: The recommended site is the front of the thighs. You may also use the lower abdomen, but not the area 2 inches around the navel (belly button).
Choose a different site each time you give yourself an injection.
Do not inject into areas where the skin is tender, bruised, red, scaly or hard. Avoid areas with scars or stretch marks.
2b. Caregivers and Healthcare Professionals Only: If a caregiver or healthcare professional is giving you your injection, they may also inject into your outer upper arm.
3. Cleaning your injection site: Wash your hands with hot soapy water.
Using a circular motion, clean the injection site with the alcohol swab. Leave it to dry before injecting.
Do not touch the cleaned area again before injecting.
Your injection: 4. Removing the cap: Only remove the cap when you are ready to use the Fraizeron SensoReady pen.
Twist off the cap.
Once removed, throw away the cap. Do not try to re-attach the cap.
Use the Fraizeron SensoReady pen within 5 minutes of removing the cap.
5. Holding your Fraizeron SensoReady pen: Hold the Fraizeron SensoReady pen at 90 degrees to the cleaned injection site.
YOU MUST READ THIS BEFORE INJECTING: During the injection you will hear 2 loud clicks.
The 1st click indicates that the injection has started. Several seconds later a 2nd click will indicate that the injection is almost finished.
You must keep holding the Fraizeron SensoReady pen firmly against your skin until you see a green indicator fill the window and stop moving.
6. Starting your injection: Press the Fraizeron SensoReady pen firmly against the skin to start the injection.
The 1st click indicates the injection has started.
Keep holding the Fraizeron SensoReady pen firmly against your skin.
The green indicator shows the progress of the injection.
7. Completing your injection: Listen for the 2nd click. This indicates the injection is almost complete.
Check the green indicator fills the window and has stopped moving.
The Fraizeron SensoReady pen can now be removed.
After your injection: 8. Check the green indicator fills the window: This means the medicine has been delivered. Contact your doctor if the green indicator is not visible.
There may be a small amount of blood at the injection site. You can press a cotton ball or gauze over the injection site and hold it for 10 seconds. Do not rub the injection site. You may cover the injection site with a small adhesive bandage, if needed.
9. Disposing of your Fraizeron SensoReady pen: Dispose of the used Fraizeron SensoReady pen in a sharps disposal container (i.e. a puncture-resistant closable container, or similar).
Never try to reuse your Fraizeron SensoReady pen.
